"CRYSTAL" Brand AA-603 Magnetic Sine Table is complete Sine System for precision grinding. ' Crystal' Sine table is supplied with Fine Pitch Permanent Magnetic Chuck.

Features:

• Magnetic Sine tables are ideal for precision angle grinding & inspections. 
• They are made from high quality steel & base plate contains hardened bits. An angle can be set to within ± 5 seconds of a degree. 
• Firm hinge clamps reduce possibility of distortions. 
• Flatness 0.005mm per 100 mm. Center distance of the roller is within 0.005 min. Fine pitch chuck of 9.9mm with laminated brass pole is provided for rigid clamping of small , medium & large components.
• Suitable for angle range from 0-45 degree. 

• Compound sine table, can be use to grind two way angle at same time.
• A positive locking device is mounted on the base.
• Made from high quality steel.
• Hardened and ground to 58 -62 Rc.
• An angle can be set to within ±5 seconds of degree.
• Firm hinge clamps reduce possibility of distortions.
• Tapped hole in Top, sides and end, facilities clamping.
• Suitable for 0-45 degree capacity.