Crystal Non Magnetic V Blocks

Product Details:

• Used for Grinding, Light Milling, Drilling & Inspection of Round & Square Jobs.
• Accuracy for Flatness, Squareness and Parallelism within ±0.005mm. 
• Can be used on its base, the ends & on either side. 
• Hardness 60±2 Rc. 
• M10 tapping at base M8 tapping on side for clamping on angle plate or face plate or on magnetic chuck. 
• A clamp with cap & adjustable screws prevents tilting of block.
• A clearance hole at centre for drilling or removing of dowel pins.
• The "V" at stepped end at right angle to the base provides a handy means for holding shouldered studs round pins etc.

• The sides are ground parallel and the V groove is ground central and parallel to the sides and the base. 
• The block is 48mm square, and the base length is 90mm. An added feature is the tapped holes used for mounting the V Block on face plates or angle plates. 
• The block also has one M10 tapped hole in the base and one M8 on each side so that it can be attached to an angle plate. The groove at the stepped end is at a right angle to the base and is handy for holding threaded studs, round pins. 

Product Details:

• A precision ‘V’ Block for the most accurate Tool Room, Quality Control, Work Shop etc.
• All sides precision ground parallel and square.
• Holds the square and round work.
• Grade- B: Elongated ‘V’ Blocks made from Extra hard and dense cast iron.
• Grade- A: Elongated ‘V’ Blocks made from high quality tool steel.
• Elongated ‘V’ Blocks are suitable for marking checking, Drilling and milling.
• V groves & all sides are ground central, parallel & square.
• Perfect alignment in matched pairs having hardness 55 HRC ± 2 HRC. Elongated V Blocks do not come with clamps.

Specifications:

Product Details:

We are highly engaged in offering Non- Magnetic ''V'' Blocks to our prestigious clients.

Features:

• ‘V’ Blocks are hardened and ground to 55 ± 2 HRC.
• Precision ‘V’ Blocks for Tool Room,Inspection, Work, Assembly Shop.
• All sides precision ground, parallel and square within ± 5 microns.
• Supplied with clamp for holding job.

Product Details:

• Grade A- 'V' Blocks are made from high quality tool steel.  Hardened to 55 HRC ± 2 HRC and are precision ground. 
• Grade B- 'V' Blocks are made from closed grain cast iron. 
• The top 'V and bottom 'V are parallel and its squareness to the end faces and height variations in the 'V block are controlled in a  matched pair. 
• Supplied with clamps for holding job. 
• Perfect alignment in matched pairs.

Product Details:

• Hardened steel with clamps and screw. This unique design leaves entire top surfaces of work accessible. 
• Tenon slot (16x3) at bottom can be used for clamping of machine bed. 
• V parallel with bottom within 0.005mm. 
• V groove central within 0.005mm. 
• Tenant slot central with V within 0.010mm. 

Product Details:

• Precision 'V' Blocks for most accurate work in Tool Room. Quality Control & shop floor. 
• Made from extra dense Cast iron. 
• V grooves ground central & parallel to sides and base within 0.005 mm. 

Product Details:

• V Blocks are Hardened & Ground to 55 HRC ± 2 HRC.
• The top V and bottom 'V' are parallel within ± 3 micron and it's squareness to the end faces and height variations to the V Block in a pair is within ± 3 micron. 
• Supplied with Clamp for holding job. 
• V Blocks are so designed that clamps do not protrude over the sides. 

Product Details:

• A precision 'V' block hardened at 55 HRC ± 2 HRC for the most accurate Tool Room Work. 
• V-Grooves are ground central and parallel to the sides and base there is perfect alignment in matched pairs. 
• Holds square or round work. Clamp has tapping holes at 45° and 90°. 
• Stepped groove construction permits low or high clamp mounting for small or large work up to 0 50mm & 35mm square. 
• Clamps do not project in the sides, permitting block to be used on base, ends or sides. 
• Exclusive features gives it extra utility and versatility not found in other types of blocks. 

Product Details:

• Used for checking of heavy round cylindrical jobs. 
• Supplied in perfectly matched pair having accuracy ± 0.010 mm. 
• Four hardened steel balls on top face provide self-aligning , hard wearing , accurate support.
• Ball wearing is even, so accuracy doesn't get affected. 
• Ball can be replaced & readjusted with minimum effort & cost.