• “Crystal” Magnetic Balancing Weights are compact Units, embodying powerful, Alnico magnets assembled in steel Pot by aluminum retaining & insulating rings designed for magnetic Holding and for balancing purpose for various assemblies.
• One side magnetic face & compact design.
• They are ground & are supplied with the specific weight available from 5 gms to 500 gms. In various steps.

• Contact surface precision ground & lapped.
• Fully hardened to 58 RC up to 300mm length & Above 300mm length working edges are hardened to 58RC.
• Packed in individual wooden Box.

• Magnetism is the smartest way of handling ferrous loads. Armatech Associates undertakes ongoing research and development in the field of permanent electromagnets. We have continuously researched and developed Permanent - Electro Magnets for 25 years, the only technology that combines safety, strength, convenience and power savings.
• Armatech “Crystal” brand introduces Electro Perm Magnetic (EPM) Lifters for heavy duty material and sheet metal handling. These can handle loads with extreme easiness in the minimum area. EPM lifters ensure high magnetic and safe performances and are not subject to internal wear or deformation resulting from moving internal parts.
• EPM lifters are a breakthrough technology as compared to the conventional lifters. EPM Lifters are “COLD” devices, also they do not require a continuous electrical supply, except only for a few seconds – in activation and deactivation. So when in operation, electrical supply is not essential for lifting the required load and thereby eliminating risks associated with power failure.
• These are efficient because they always operate from the top without compressing or deforming the load. Floor space is optimized as no empty areas are required around or in between the loads to get access for their pick up. No other solution can grant the same level of performances and practical use.
• Electro permanent system is the ideal solution for steel structural works distribution and storage service centers, metalworking, ship buildings, surface treatment and for all modern industries interested in increasing the efficiency of production process.

• Knife edges precision ground & lapped.
• Plastic head insulators.
• Packed in individual wooden Box.

Specification:

• “Crystal” Magnetic Pins are suitable for checking the run out of Gears.
• These Pins are manufactured from powerful Alnico magnets.
• Assembled in alloy steel bar & are hard chrome plated for ware resistance.
• Precisionly ground as per customer’s requirements.
• The Pins are available in various sizes, Length & diameter ranging from 3mm to 20 mm.