Armatech Associates
Armatech Associates
Bhosari, Pune, Maharashtra
SEND SMS
SEND EMAIL

Crystal Magnetic V Blocks

Prominent & Leading Manufacturer from Pune, we offer magnetic v blocks, series aa-174 long 'v' blocks and series aa-170 hardened 'v' block.

Magnetic V Blocks

Magnetic V Blocks
  • Magnetic V Blocks
Ask For Price
Product Price :Get Latest Price

Product Details:

Size/Dimension200 x 150 x 125 mm (8")(H x L x W)
BrandCrystal
MaterialCarbon Steel
Model NumberAA - 1806 H
SeriesAA-180

'V’ Blocks are required for Quality Control, Tool Room and Standard Room. "Crystal" Brand Magnetic 'V’ Blocks have high magnetic pull, hence they can be used fro drilling and grinding (both wet and dry) and even for light milling work.

The 'V’ Block has a total three magnetic surfaces. Top and Bottom with 90 'V’ angle and end surface opposite to switch. All three magnetic surfaces and the two sides are carefully ground. Their accuracy for flatness, parallelism and squareness is within 0.005 mm for 2", 3", 4" & 6" 'V’ Blocks. When turned "ON" all three magnetic surfaces are activated Simultaneously.

The permanent magnet holds the work firmly in the 'V’ and if the block rests on a magnetically conductive surface, it is held firmly to this surface. The magnetic pull is constant and will not decrease eveb after long use. The magnetic system being shielded from penetration of moisture, cannot be damaged by coolants or other fluids.

Specifications:

CatNO.H x L x W
AA - 1803 S40 x 50 x 40 mm (2”)
AA - 1803 H40 x 50 x 40 mm (2”)
AA - 1802 S75 x 75 x 56 mm (3”)
AA - 1802 H75 x 75 x 56 mm (3”)
AA - 1801 S100 x 95 x 70 mm (4”)
AA - 1801 H100 x 95 x 70 mm ( 4”)
AA - 1805 S150 x 100 x 75 mm (6”)
AA - 1805 H150 x 100 x 75 mm (6”)
AA – 1806 S200 x 150 x 125 mm (8”)
Request
Callback
Yes! I am interested
View PDF

Series AA-174 Long 'V' Blocks

Series AA-174 Long 'V' Blocks
  • Series AA-174 Long 'V' Blocks
Ask For Price
Product Price :Get Latest Price

Product Details:

Size350x120x75 mm
BrandCrystal
SeriesAA-174
Model NumberAA-1741
Range05-80 mm

Features:
  • Precision 'V' Blocks for most accurate work in Tool Room. Quality Control & shop floor. 
  • Made from extra dense Cast iron. 
  • V grooves ground central & parallel to sides and base within 0.005 mm. 
Request
Callback
Yes! I am interested
View PDF

Series AA-170 Hardened 'V' Block

Series AA-170 Hardened 'V' Block
  • Series AA-170 Hardened 'V' Block
Ask For Price
Product Price :Get Latest Price

Product Details:

Size45x40x35 mm
BrandCrystal
Model NumberAA-1701
Clamping Range3-25 mm(Dia.)
SeriesAA-170

Features:
  • V Blocks are Hardened & Ground to 55 HRC ± 2 HRC.
  • The top V and bottom 'V' are parallel within ± 3 micron and it's squareness to the end faces and height variations to the V Block in a pair is within ± 3 micron. 
  • Supplied with Clamp for holding job. 
  • V Blocks are so designed that clamps do not protrude over the sides. 

Request
Callback
Yes! I am interested
View PDF
X

Explore more products



Reach Us
Amol Lunawat (Partner)
W-174/A, S Block, M. I. D. C., Bhosari
Pune- 411026, Maharashtra, India



Call Us

Share Us

F GT L


Send E-mailSend SMS