Magnetic Products

Product Details:

"CRYSTAL" Magnetic Adjustable Link is a twin unit possessing a multi angle capability.
It can be quick located at any angle by the turn of a wing nut thus providing the simplest and
most rapid means of clamping together, two light weight ferrous parts.
A powerful grip is exerted by two permanent magnets housed in each of two rectangular blocks
which are connected laterally by a pair of side pieces.
By using the link in multiples, the most complex arrangement of sheets and strips can be firmly
and easily secured for welding and assembly.

Other Details:

• We also manufacture the magnetic Floaters/ Separators as per customer's specifications.

Product Details:

Pot Magnets:

• “CRYSTAL” Pot Magnets are compact units embodying powerful “Alnico” magnets assembled in mild steel pot by aluminum retaining and insulating rings designed for magnetic holding and lifting applications of all sorts.
• They can be readily inserted into other assemblies and the mild steel pot be easily machined to suit individual requirements.
• Available in Neodymium Pot Magnet, Hook Magnet, Shallow Pot Magnet, Deep Pot Magnet, Countersunk Magnet and in four sizes. Supplied complete with plated keeper.
• Special sizes can also be manufactured.

Specifications:

Product Details:

“CRYSTAL” Button Magnets which are made in four sizes specially designed in “Alnico” to give a highly efficient magnet suitable for magnetic indicators and drives.
Designed for applications where height is too restricted for conventional deep Pot magnets.
Ideal for magnetic fasteners in machine tools, workshops & in office displays.
They can be fixed by non-magnetic screw to any non-ferrous materials. Supplied complete with plated keeper.
Special sizes can also be manufactured.
Square and rectangular shape also available.

Specifications:

Product Details:

A Combination of all the facilities of the magnetic Holder and Adjustable Links.
The "CRYSTAL" Magnetic Positioner will hold round or flat parts at any required angle.
Each of the magnetic blocks has two magnetic faces.
The positioner is locked by tightening the central locknut by a spanner.
If necessary the blocks can be dismounted from the side straps and used individually as work
holders.

Specifications: 

• magnatic positioner supplied in as et of two will hold round or fdlat parts at any required angle 
• each of the magnatic block has two magnatic faces 
• the positioner is locked by tightening the central lockout by a spanner 
• if neccesary the blkocks can be dismounted from the side straps and used individually as work holders 

Product Details:

A power permanent AA-1603 Magnetic Base hold firmly to any steel or iron surface-horizontally, vertically or up- side down, thus, eliminating time spent on clamping indicator to machine The dial gauge can be locked in any desired position with single lock (Centralised clamping) The clamping hole intended for dia 8 mm stem and dovetail clamp for dial test indicator. Fine Adjustment is provided. The clamping is very easy and smooth as same is achieved by operating the centralized Knob.

Product Details:

Features:

• Designed to hold work magnetically for inspection & layout work,
• Very Useful For Holding Odd shaped Parts for Grinding, Having large magnetic Surface Of 100 X 175mm. Precision Ground.
• Accuracy for Flatness, Parallelism and Squarness is within 0.005mm.

Product Details:

We are highly engaged in offering Crystal Magnetic Holder to our prestigious clients.

Features:

• CRYSTAL’ Magnetic Holder has instant grip at the turn of a handle.
• Incorporating plain and vee faces, it is equally effective in securing iron, steel sheets, bars or tubes, on machine bed or any other flat ferrous base.
• This can be used in Tool Room, Shop Floor, inspection Department, Assembly Shop, and has unlimited application in Welding shop.
• The magnetic holder is a compact unit housing powerful permanent magnet and cannot be demagnetized unless it is dismantled [which should not be attempted in any case].
• Maintenance requirement is limited to occasional oiling and regrinding of the magnetic contacting faces, which should be flat and smooth to ensure maximum holding power.
• Any welding splash can be removed with a smooth file.
• Hardened AA-1511 H: Same as Cat. No. AA-1511 S but with hardened holding surface and ‘V’ angle. With this type, all ‘V’ angles are equipped with Hardened Steel Plates, which ensure extra resistance

Product Details:

Most suitable for pulling- out steel material or steel sheets, carrying material like metal moulds, Press Dies etc. A cam mechanism is employed so as not to cause scratches on the surface of the job. The job can be held or released smoothly.

Product Details:

Features:

• Accuracy for Flatness, Squamess & Parallelism within ± 0.005mm 
• Hardened bits in the top V face in H series. 
• To hold cylindrical work pieces for inspection, not suitable for machining due to weak magnetic force. 
• Top , Bottom & V angle surfaces are precision ground & matched in pairs. 

Product Details:

Magnetic Hold Fast:

• Basically work holding and work handling tools these pot magnets are appropriate when bestpossible grip is required but not attraction from a distance.
• Because of their exceptionally great grips each has a jack-off screw, which also serves as a
• handle.
• Magnetic effects are confined to the pole face, there is no stray flux. Can be used single or in multiple to make welding and other assembly jigs, and lifting magnets.

Features:

• Magnetic holdfast are appropriate where firm grip is required. 
• As the magnetic force is strong in holdfast therefore a jack of screw is provided for On/Off which also serves as a handle. 
• Magnetic effects are confined to the pole face, there is no stray flux. Can be used in single or in multiple to make welding and other assembly jigs or to lift objects. 

Specifications:

Product Details:

The 'V’ Block have two 'V’ angles of different sizes to take jobs of various dimention. By means of clamp the work can be held rigidly to the 'V’ Block. The top 'V’ and bottom 'V’ are parallel within ± 3 micron and it's squareness to the end faces and height variation to the 'V Block in a pair is within ± 3 micron

In Built Features:

• V Blocks are Hardened & Ground to 55 HRC ± 2 HRC.
• The top V and bottom V are parallel within ± 3 micron and its squareness to the end faces and height variations to the V Block in a pair is within ± 3 micron.
• Supplied with Clamp for holding job.
• Hold square and Round work.

Product Details:

Features:

• CRYSTAL’ Magnetic Holder has instant grip at the turn of a handle.
• Incorporating plain and vee faces, it is equally effective in securing iron, steel sheets, bars or tubes, on machine bed or any other flat ferrous base.
• This can be used in Tool Room, Shop Floor, inspection Department, Assembly Shop, and has unlimited application in Welding shop.
• The magnetic holder is a compact unit housing powerful permanent magnet and cannot be demagnetized unless it is dismantled [which should not be attempted in any case].
• Maintenance requirement is limited to occasional oiling and regrinding of the magnetic contacting faces, which should be flat and smooth to ensure maximum holding power.
• Any welding splash can be removed with a smooth file.
• Hardened AA-1511 H: Same as Cat. No. AA-1511 S but with hardened holding surface and ‘V’ angle. With this type, all ‘V’ angles are equipped with Hardened Steel Plates, which ensure extra resistance

Specifications:

 

Product Details:

For high accuracy Light Machining, Grinding, Inspection or marking out of precision components. Vice can be used, standing on its base, sides, end or top. Guaranteed 0.005/100 mm for Parallelism, Flatness & Squareness with the vice in any position. Manufactured from high grade oil hardening steel, hardened & tempered to ensure stability & accuracy throughout the unit's working life.

Product Details:

Product Details:

Magnetic Vice:

• “CRYSTAL” magnetic vice is a totally distortion free vice, capable of ensuring that the component holds square and set up time is minimized.
• Overriding the distortion is one of the features the conventional vice, sometimes severely limiting its use.
• Flatness 0.005mm. Squarness 0.005mm. Parallelism 0.005mm. Permanent powerful magnet.
• ON-OFF switch.
• All surfaces are precision ground.
• Vertical ‘V’ in movable jaw.

Other Details: 

 

Product Details:

We are highly engaged in offering Crystal Magnetic Holder to our prestigious clients.

Features:

• CRYSTAL’ Magnetic Holder has instant grip at the turn of a handle.
• Incorporating plain and vee faces, it is equally effective in securing iron, steel sheets, bars or tubes, on machine bed or any other flat ferrous base.
• This can be used in Tool Room, Shop Floor, inspection Department, Assembly Shop, and has unlimited application in Welding shop.
• The magnetic holder is a compact unit housing powerful permanent magnet and cannot be demagnetized unless it is dismantled [which should not be attempted in any case].
• Maintenance requirement is limited to occasional oiling and regrinding of the magnetic contacting faces, which should be flat and smooth to ensure maximum holding power.
• Any welding splash can be removed with a smooth file.
• Hardened AA-1511 H: Same as Cat. No. AA-1511 S but with hardened holding surface and ‘V’ angle. With this type, all ‘V’ angles are equipped with Hardened Steel Plates, which ensure extra resistance

Product Details:

Features:

• Magnetic Blocks are designed to hold the steel components in position while welding, marking, and grinding.
• They are useful in Tool-Room while doing assemblies of jigs and fixtures.
• They are used with sine tables for inspection of components etc.
• They can be used as magnetic parallels as the pairs are matched within ±5 micron. For bigger size on-off switch is provided.
• We also manufacture ‘v’ blocks to customer’s specifications.

Specifications:
Standard Blocks-S:

Hardened Blocks-H:

Product Details:

Features:

• CRYSTAL’ Magnetic Holder has instant grip at the turn of a handle.
• Incorporating plain and vee faces, it is equally effective in securing iron, steel sheets, bars or tubes, on machine bed or any other flat ferrous base.
• This can be used in Tool Room, Shop Floor, inspection Department, Assembly Shop, and has unlimited application in Welding shop.
• The magnetic holder is a compact unit housing powerful permanent magnet and cannot be demagnetized unless it is dismantled [which should not be attempted in any case].
• Maintenance requirement is limited to occasional oiling and regrinding of the magnetic contacting faces, which should be flat and smooth to ensure maximum holding power.
• Any welding splash can be removed with a smooth file.
• Hardened AA-1511 H: Same as Cat. No. AA-1511 S but with hardened holding surface and ‘V’ angle. With this type, all ‘V’ angles are equipped with Hardened Steel Plates, which ensure extra resistance

Product Details:

“Crystal” brand Permanent Magnetic Racks are useful in tool room, workshops, paint shop, machine shops, assembly, garages, to keep the hand tools such as spanners, screw drivers, calipers, files, cutting tools, etc. In a systematic manner. It helps the user for easy handling & storage. They are available in different lengths. Magnetic Racks are totally protected from rust and corrosion.
These racks can be easily mounted.
“Crystal” magnetic racks make the best possible use of permanent magnet material in the solution of many lifting and holding problems, as all available magnetic flux from a small number of magnets is concentrated in the two mild steel pole pieces.

Details:

Product Details:

In this product two magnets are combined with round angle indicating dial. One can adjust any angle freely. These holders have "ON/OFF" facility, to remove the work piece easily. All magnetic holders have one 'V' and can attract curved faces as well as plane faces.

Details:

Product Details:

Features:

• "CRYSTAL" magnetic sticks are very useful for removing steel particles from blind holes and useful for assembly & maintenance work for removing steel parts lying in oil tanks.
• "CRYSTAL" magnetic sticks are compact unit embodying powerful 'Alnico' Magnets assembled in stainless steel pots which are designed for lifting applications. Length can be increased by joining extension.
• Extra lengths are available on request.

Specification: